queen of humility
12-05-2011, 03:44
السلآم عليكم ورحمة الله وبركآآته
أسعد الله مسآآئكم وصبآحكم .. بالخيرآآت
هذا سؤال مدعوم بالصوره استطعت اني اجاوب 3 فقرات منه الاخيره والله اني عجزت قلت اطرح هنيآآ علّكم تعاونوني عليه ويصير التمرين عندكم هني,,,
When compressed air flows into a double-acting cylinder, the piston moves because the air behind it is at a higher pressure than the air in front of it (see Figure below).
What force is exerted by a 10 cm bore diameter cylinder, at a pressure of 6 bar ?
What force would be exerted by the same cylinder if the air pressure was increased to 9 atm?
Would the 10 cm bore diameter at 9 atm exert enough force to move a load of 1200 kg ?
What pressure (in Pascal) would be needed to allow a 10 cm bore diameter cylinder to move a load of 2000 N ?
http://up.arab-x.com/Apr11/y5D58138.jpg (http://up.arab-x.com/)
---------------------------------------------------------------------------
الفقره الاولى:-
D=10cm
P=6 bar
Bar=105 pa
A= π (d/ 2)2
A=3.14(10-1/2)2
A=7.85 .10-3 m2
F=P.A
F=6 .105 .7.85 .10-3
F=47.1 .102 N
-----------------------------------------------------------------------
الفقره الثانيه ..
رح يكون نفس المساحه المستخدمه A=7.85 . 10-3 m2
الضغط هني نحوله من الاتموسفير للبارا ومن البارا للباسكال>ذكيه انجاز ههه
p=9. 1.013=9.117 bar
عاد تصير هيج
F=P.A
F=9.117 .105 .7.85 .10 -3
F=71.56 .102 N = 7156 N
--------------------------------------------------------------------------------------------------
الفقره الثالثه
W= m . g
w=1200 .10
w=12000
F= 7156
بالتالي القوه اقل من الوزن
F<w èThe cylinder cant move this load
------------------------------------------------------------------------------------
معليش ملآحظه الاسس اللي خطهآ صغير جنب الرقم عجزت اجيبها اس
ايه عآد نرجع لمحور حديثنا <<ههه انا ابيكم تساعدوني بحل الرابع لاني حليت الفقرات الثالث وبقي ذاا والله ينطيكم الف الف عافيه ,,~,~
اختكم ملكة التوآضع
أسعد الله مسآآئكم وصبآحكم .. بالخيرآآت
هذا سؤال مدعوم بالصوره استطعت اني اجاوب 3 فقرات منه الاخيره والله اني عجزت قلت اطرح هنيآآ علّكم تعاونوني عليه ويصير التمرين عندكم هني,,,
When compressed air flows into a double-acting cylinder, the piston moves because the air behind it is at a higher pressure than the air in front of it (see Figure below).
What force is exerted by a 10 cm bore diameter cylinder, at a pressure of 6 bar ?
What force would be exerted by the same cylinder if the air pressure was increased to 9 atm?
Would the 10 cm bore diameter at 9 atm exert enough force to move a load of 1200 kg ?
What pressure (in Pascal) would be needed to allow a 10 cm bore diameter cylinder to move a load of 2000 N ?
http://up.arab-x.com/Apr11/y5D58138.jpg (http://up.arab-x.com/)
---------------------------------------------------------------------------
الفقره الاولى:-
D=10cm
P=6 bar
Bar=105 pa
A= π (d/ 2)2
A=3.14(10-1/2)2
A=7.85 .10-3 m2
F=P.A
F=6 .105 .7.85 .10-3
F=47.1 .102 N
-----------------------------------------------------------------------
الفقره الثانيه ..
رح يكون نفس المساحه المستخدمه A=7.85 . 10-3 m2
الضغط هني نحوله من الاتموسفير للبارا ومن البارا للباسكال>ذكيه انجاز ههه
p=9. 1.013=9.117 bar
عاد تصير هيج
F=P.A
F=9.117 .105 .7.85 .10 -3
F=71.56 .102 N = 7156 N
--------------------------------------------------------------------------------------------------
الفقره الثالثه
W= m . g
w=1200 .10
w=12000
F= 7156
بالتالي القوه اقل من الوزن
F<w èThe cylinder cant move this load
------------------------------------------------------------------------------------
معليش ملآحظه الاسس اللي خطهآ صغير جنب الرقم عجزت اجيبها اس
ايه عآد نرجع لمحور حديثنا <<ههه انا ابيكم تساعدوني بحل الرابع لاني حليت الفقرات الثالث وبقي ذاا والله ينطيكم الف الف عافيه ,,~,~
اختكم ملكة التوآضع